When you join a Columbus tour we provide full route files that load straight onto your Garmin or TomTom sat nav, so you can ride each day’s route without fiddling with maps or planning. Your route files are emailed to you at around the same time as your tour guide. This page walks you through loading them step by step.
Your tour pack also includes the daily route notes, with suggested coffee, fuel and lunch stops, and tells you when to change your sat nav settings to avoid or allow motorways and toll roads.
Before You Start
Loading route files is very similar to saving files to an external hard drive or USB stick from your computer. A few things to do first:
- Save the route files from the email we sent you to somewhere on your computer where you can find them easily. If the email hasn’t arrived, let us know.
- Update your device’s maps if updates are available.
- Check your routing settings. Your sat nav should always be set to “Fastest Route” and “Avoid Unpaved Roads”.
Loading Routes to a Garmin
- Connect your Garmin. Plug it into a USB socket on your computer using the USB cable supplied with the device and wait for it to turn on. A “USB connection detected” message will appear on the screen. Ignore it and let the timer count down.
- Find it on your PC. After a short time your device opens in the file browser under its device name, such as zūmo 396. If you have Garmin Express installed, a box for that software opens too, which gives you the option to update your device to the latest maps.
- Copy the route files. Open the device, go to Internal Storage and then GPX. If you already have routes on your device, this is where they are stored. Copy and paste the route files we emailed you into the GPX folder.
- Restart the Garmin. Unplug it from your computer, which turns it off, then turn it back on. Once it has woken up you should see a message saying “New files found – Import to trip planner”. Tap Yes.
- Import the routes. You’ll be shown a list of files. Tick the box for each day and tap Import. The Garmin loads all the files into the trip planner, which can take a couple of minutes depending on how many files there are.
- Find your routes. Once the import has finished, each day’s route is under Where To? → Trip Planner → Saved Trips.
Garmin Route Settings
Depending on your tour, you may need to change the motorway settings in the morning or during the day to suit the planned route. Go to Settings and then Navigation Preferences. Your daily route notes tell you whenever this is necessary. When you change a setting the Garmin asks whether you want to recalculate the route, so always tap Yes to make sure the device takes note of the change.
Tip – skipping a route point: If you’ve missed a route point and the sat nav keeps trying to turn you around, look for the pin and arrow icon in the bottom left of the screen while you’re riding. Tap it and the Garmin asks whether you want to skip the named route point.
Loading Routes to a TomTom
Adding route files to a TomTom is very similar to the Garmin process.
- Connect your TomTom. Plug it into your PC and wait for the message “Connected to Computer” to appear on the TomTom screen, with an Import Routes icon in the bottom right. Tap Import Routes.
- Copy the route files. On your PC, the TomTom shows up in the file browser under your device’s model number. Open it, then open the Internal Storage folder and copy and paste the route files we sent you into it.
- Tell the TomTom you’re done. Go back to the TomTom screen and tap Done.
- Select the routes. The message “Select routes to import” appears. Tick the routes for your tour and press Import. Keep the TomTom connected to your PC throughout this stage.
- Finish up. When it shows “Import Complete”, tap OK, then disconnect the TomTom from your PC.
- Find your routes. Your imported routes are listed under My Routes.
TomTom Route Settings
To change your motorway preferences, go to Settings and then Route Planning. The TomTom gives separate options for Toll Roads and Motorways. Select each one when your daily route notes ask for it.
Tip – skipping a route point: Tap the four dots at the bottom of the screen, tap Current Route, then choose Skip Next Stop.
Sat Nav Questions
Which sat navs do you provide route files for?
We provide route files for Garmin and TomTom devices. They load directly onto the unit, with no need for a separate app.
What if the route email doesn’t arrive?
Your route files are emailed at around the same time as your tour guide. If you can’t find them, check your junk folder, then get in touch and we’ll resend them.
Can I load the routes onto my phone instead?
It’s possible to load the files into mapping apps such as MyRouteApp. Most riders on our tours use a Garmin or TomTom unit, and we can only provide step-by-step support for those.
My sat nav keeps telling me to turn around. What do I do?
You’ve probably missed a route point. Use the skip function described above (the pin and arrow icon on a Garmin, or Current Route → Skip Next Stop on a TomTom).
I’m stuck loading the files. Can you help?
Yes. Just give us a call or send an email and we’ll talk you through it.
Need a Hand?
Stuck Loading Your Routes?
If you get stuck at any stage, just give us a call or send us an email and we’ll help you out.